Check seven times – enter once
I have previously written about how to connect VBR to a Nutanix cluster, as well as how to create backup tasks and restore.
In this article, we will talk about a very important VBR functionality – Instant Recovery, support for which was added with the release of Nutanix AOS 6.0 STS and AOS 6.5 LTS.
Continue reading “Veeam Backup & Replication Instant Recovery to Nutanix AHV” 
VMware ESXi 8.0 Update 2b is out and contains a lot of bug fixes. One of the fixes I want to mention is a bug in CBT:
Changed Block Tracking (CBT) might not work as expected on a hot extended virtual disk:
In vSphere 8.0 Update 2, to optimize the open and close process of virtual disks during hot extension, the disk remains open during hot extend operations. Due to this change, incremental backup of virtual disks with CBT enabled might be incomplete, because the CBT in-memory bitmap does not resize, and CBT cannot record the changes to the extended disk block. As a result, when you try to restore a VM from an incremental backup of virtual disks with CBT, the VM might fail to start.
As a workaround, there were two options: not to use hot extend and perform disk extend operations when the VM is powered off, or create periodically full backups to reset the CBT.
So, if you’re running ESXi version 8.0 Update 2, you should consider updating to the 8.0 Update 2b as soon as possible.
You can read about other release notes here.
With this article, I close the series on the basics of Ceph deployment. Previously, we looked at how to deploy Ceph, and how block and object access is provided.
This article will briefly describe the procedure for providing file access in Ceph using CephFS. This topic is very extensive and a lot may be missed, so please refer to the official documentation for more information.
Continue reading “Connecting Ceph clients. File access with CephFS”
In addition to block and file data access, Ceph also supports object access via the S3 or Swift protocols.
In this case, we will look at what settings need to be made on the Ceph side to provide clients with the ability to store data using the S3 protocol.
Let me remind you that I previously described the procedure for installing Ceph Reef from scratch in this article. In this case, I use the same platform, as well as a client based on Rocky Linux 9.
Also, I previously wrote about connecting block devices using RBD here.
Continue reading “Connecting Ceph clients. Ceph Object Gateway and S3”
On the 00:00 1st of March 2024, Kazakhstan changes the clocks to a single time zone UTC +5 for the whole country. It will affect two time zones: Asia/Almaty and Asia/Qostanay, which are in UTC +6 and need to be adjusted.
And the question may arise – what to do?
As this blog is more about Virtualization, one thing to mention: there are not many problems. Most hypervisors work in the UTC +0 time zone, and the time zone should be correct inside the Guest Virtual Machines.
Many people ask: Will the NTP server move my clock back for an hour? The answer is no. NTP servers work in the UTC +0. And on the 1st of March, they won’t move your clock backward.
In this article, we will look briefly at Linux systems and how to change the time.
Continue reading “Considerations about changes in Time Zones in Kazakhstan and how to deal with it in Linux”
RBD, aka RADOS Block Device, as you might guess from the name, allows you to allocate space from Ceph and present it to clients as block devices (disks).
RBD can often be found in conjunction with virtualization, in Kubernetes, where disks are connected to containers as PV, and also inside the client OS.
In this case, we will look at how to connect block devices with Ceph to a regular Linux host.
Continue reading “Connecting Ceph clients. Block devices – RBD”
The last time I had a chance to work with Ceph was the release of Nautilus (14), several years ago.
Since then, some aspects have changed in the procedure for creating and managing the Ceph cluster.
In this article, I plan to refresh my knowledge on deploying Ceph based on Reef release (18) as an example.
Continue reading “Deploying Ceph Reef cluster using cephadm”
Good news for Nutanix Cloud Clusters (NC2) users – two new courses and certification tracks have been announced.
Two free online courses:
Nutanix Cloud Clusters on AWS Administration (NC2A-AWS) – Configuring and administrating NC2 in the AWS environment;
Nutanix Cloud Clusters on Azure Administration (NC2A-Azure) – Configuring and administrating NC2 in the Microsoft Azure environment.
Both courses include a theoretical part and Hands-on Labs as well.
And there are new certifications – Nutanix Certified Professional – Cloud Integration for AWS and Azure.
NCP-CI-AWS 6.7;
NCP-CI-Azure 6.7.
As usual, both exams are in beta state, and you can take them for free. Use discount code NCPCIAWS67BETA for NCP-CI-AWS 6.7 exam and NCPCIAZURE67BETA for NCP-CI-Azure 6.7. This offer is only available to the first 250 participants, and the last day to test is March 10, 2024.
You may not know, but last year Veeam launched a set of Hands-On Labs (HOL) to demonstrate the product’s capabilities. One thing I like is that it’s not just a point-and-click Labs, but a whole preconfigured environment.
Example of labs available (and more):
You can get access to the HOL as an End user and as a Partner as well.
Notice, that depending on the region the lab set may be different.
After registering to the Lab you will receive an email with instructions on connecting to the environment. It could take a while.
During the test, my overall experience was excellent. The HOLs has clear instructions and a non-lagging environment. So check this out.
Veeam configuration backup is an easy solution to back up your VBR server, including configuration, jobs, sessions, and more. If something goes wrong with a backup server, all you need to do is install a new one and restore the configuration from the previously created backup.
In this article, we will look at how to create a configuration backup of the VBR server, and how to restore when needed.
Continue reading “Restoring Veeam Backup Server from configuration backup”